View New Tips, as we add more, under blog category TIPS
Diamond Pad Tricks of the Trade
These pad progressions/formulas or Line-Ups mix wet & dry diamond pads depending on the type of stone and desired finish. Trick = Running the dry pads with water!
Click on the menu in the following pdf:
SHINE Granite
SHINE Concrete
SHINE Marble
SHINE Artificial Stone
HONE Granite
HONE Marble
HONE Artificial Stone
Edge Polishing Line-Ups
Line-Up charts for Abressa Edge polishing.
SandHandler Set-Up
Quick set-up video.
You probably have already seen how quickly the SandHandler can be set up. Looks so easy to use this automatic sandblasting system…
This step-by-step Tech Tip video shows exactly how to do it, and it features the newer SandHandler with the screen on the front of the cabinet.
HOW TO:
Bring to Home position at upper left, then at HOME page, zero home position (button) at PATTERN SET-UP page, bring to the upper left of stone; then click button | bring to lower right; click button
Space = .3 (a usual setting)
Passes = 2
Pattern complete button repeat for each stone go to AUTO-RUN page, press Start button.
How Do I Get Longer Life Out of My Diamond Wire?
Why are my liners wearing irregularly?
Regularly check the alignment on Pellegrini’s single-wire flywheels. This tip offers longer wear & life on diamond wire, flywheels, guide wheels and liners.
On the Tension side of the machine, the flywheel should have the bottom side of the flywheel tipped into the column 12mm (maximum 15mm)
On the Tension side of the machine, the side closest to center should be tipped away from the column max 3mm / max 6mm on the Drive side.
For more info and/or to buy Pellegrini parts, please call Eric. Align Single Wire Flywheel:
Download complete instructions
How to Repair a Broken Tablet
Clean dust and dirt from break. Squeeze epoxy onto break. (Barre-Pak™ epoxy works great.) Set broken piece into place. Use wedges front and back against 2×4’s that have been driven into the ground to hold the piece in place. Squeeze epoxy onto break and set other broken pieces in place. Again, use wedges to hold pieces into place. Allow a minimum of 24 hours for the epoxy to set up. A longer time is necessary in cooler weather.
Barre-Pak™ is easy and simple to use, anyone can use it!
Follow the simple instructions and the guesswork has been eliminated because Barre-Pak™ is pre-measured in a 70-gram kit.
Barre-Pak™ is mixed in its own container (without opening the package) and then squeeze out to apply. Clean and neat!
Buy it now | See also facebook photos & click “next”
Using Clean Stone to Revitalize a Dirty Monument
Simply spray or pour Clean Stone cleaner on the dirty stone. Rinse with water. It’s that easy! Some scrubbing or repeated steps may be necessary for extra dirty stones. Clean Stone was specially formulated to be an environmentally safe product.
Silicon Carbide or Diamond Brushes
Silicon Carbide or Diamond Brushes (diamond impregnated into the filament) coated with resin have more structural strength, providing a longer life and producing a more consistent finish. See brushes.
Of course, the brushes we sell have the resin coating – give us a call!
Barre, VT: 800.396.8049
Elberton, GA: 888.283.5863
Montrose, PA: 888.278.8383
Rockville, MN: 800.789.0815
Terrell, TX: 844.883.4108
Video index (or for more go to http://www.youtube.com/milessupply)
PadHead™ polishing & grinding heads by Miles Supply:
– Pad Head on a polisher/angle grinder
– Pad Head on grinder, bed polisher, radial arm machine and various CNC machines
– Pad Head on a line machine
– Pad Head on a radial arm machine and top polisher
+ Miles Supply SandHandler sandblast system
+ Miles Supply Stone Pro Setter
+ B4-FW is THE Best Bluestone Cutting Blade
+ Miles Supply Diamond Blade Tipping Service
+ Miles Supply Chain Inspection & Repair